To Next PageTo Next Page
Need help?Do you have a question about the Safety 1st Dream Ride and is the answer not in the manual?
General| Brand | Safety 1st |
|---|---|
| Model | Dream Ride |
| Category | Baby & Toddler Furniture |
| Language | English |
Specifies the weight and height limits for the infant car bed.
Warning regarding the consequences of not following instructions.
Identifies the carry handle component of the car bed.
Loops for attaching UAS or vehicle belts for secure installation.
The belt used for the Universal Anchorage System (UAS) installation.
Foam padding components for infant comfort and support.
Straps designed to secure the infant within the car bed.
The fastening mechanism for securing the infant's harness.
Components used to adjust the length of the buckle strap.
Connectors and adjusters for the Universal Anchorage System.
Slides used to modify the length of the harness straps.
Designated area for storing the car bed's instruction manual.
Steps for unbuckling, placing the infant, and positioning harness straps.
Instructions for buckling the harness and verifying strap fit.
Instructions for finding and unlacing the buckle strap adjustment slides.
Procedure for adjusting the length of the buckle strap.
Instructions for finding and unlacing the harness strap adjustment slides.
Procedure for adjusting the length of the harness strap.
Re-threading and tightening the buckle strap through the slides.
Instructions for adjusting the car bed's carrying handle position.
Information on placing the car bed into rocking mode.
Steps to release straps and remove the top section of the seat pad.
Procedure for passing buckle tongues through the seat pad.
Instructions for detaching the bottom section of the seat pad.
Steps to detach pad corners and remove belt loops from shell.
Procedure for unhooking and repositioning UAS belts and clips.
Instructions for threading belt loops and belts into specified slots.
Securing the 'S' clip to the UAS belt loop for installation.
Ensuring all metal clips are flush and UAS is stored correctly.
Guidance on selecting the appropriate seating position in the vehicle.
Information on regulations governing child restraint systems.
Explanation of the Universal Anchorage System for child restraints.
Instructions and considerations for using vehicle seat belts.
Emphasis on consulting the vehicle owner's manual for belt compatibility.
Identifying ways to secure the seat belt for child restraint installation.
Verifying the type and locking functionality of the seat belt retractor.
Details regarding automatic seat belt locking retractors.
Details regarding emergency seat belt locking retractors.
Instructions for inspecting seat belt latch plates.
Initial step for threading the left UAS belt through its loop.
Positioning the car bed and connecting UAS hooks to vehicle anchors.
Securing the UAS belt and verifying its tightness.
Positioning the car bed and routing the vehicle belt through loops.
Securing the vehicle belt and verifying its tightness.
Identifying the correct position and attaching the locking clip.
Re-fastening the vehicle belt and checking tightness with the clip.
