EasyManua.ls Logo

Safety 1st onBoard 22 User Manual

Safety 1st onBoard 22
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
onBoard 22
4-22 pounds (1.8-10 kg) 29 inches (74 cm) or less
4358-6459A
© 2013 Cosco Management Inc. All Rights Reserved.
4358-6459A SF Onboard 22.indd 1-24358-6459A SF Onboard 22.indd 1-2 9/5/14 4:27 PM9/5/14 4:27 PM

Other manuals for Safety 1st onBoard 22

Question and Answer IconNeed help?

Do you have a question about the Safety 1st onBoard 22 and is the answer not in the manual?

Safety 1st onBoard 22 Specifications

General IconGeneral
Product TypeInfant Car Seat
BrandSafety 1st
ModelonBoard 22
Height Capacity19-29 inches
Harness Type5-point harness
Car Seat Base IncludedYes
Rear-FacingYes
InstallationLATCH or seat belt
Safety CertificationFMVSS 213
Adjustable HeadrestNo
Removable CoverYes
Machine Washable CoverYes

Summary

A. Before You Begin

A-1 Thank You

Expresses gratitude and commitment to child safety.

A-2 Registration and Safety Notices

Importance of registration for safety recalls and notices.

A-3 Understanding Your Child Restraint

Familiarization with the child restraint's components and features.

B. Safety Information

B-1 Vehicle Seating Position

Guidance on selecting appropriate seating positions in the vehicle.

B-2 Installation in Vehicle

Key checks and considerations before installing the restraint.

B-3 Child Restraint Use

Proper usage guidelines and important warnings for the child restraint.

C. Basic Use

C-1 Remove and Install the Child Restraint to Base

Steps for attaching and detaching the carrier from its base.

C-2 Reclining the Base (on select models)

Adjusting the base recline foot for optimal positioning.

C-3 Carrier Use

Guidelines for using the restraint as a carrier, including weight limits.

C-4 Preparing Child Restraint to Fit Your Child

Adjusting harness and buckle positions for a secure fit.

C-5 Securing Child in Child Restraint

Steps for properly buckling and tightening the harness.

C-6 Remove Child from Child Restraint

Procedures for safely unbuckling and removing the child.

C-7 Removing Harness System

Steps to remove and re-thread the harness straps.

C-8 Removing Pad for Cleaning

Instructions for detaching and cleaning the restraint's pad.

C-9 Canopy Use and Installation

How to attach, remove, and adjust the canopy.

C-10 Infant Insert

Information on installing and removing the infant insert.

C-11 Installing Harness System

Detailed steps for installing the harness system correctly.

D. General Vehicle Installation

D-1 Understanding Your Vehicle

Identifying vehicle features relevant to child restraint installation.

D-2 Vehicle Seating Position

Selecting safe seating positions and avoiding hazards like airbags.

D-3 Choosing LATCH or Vehicle Belts

Deciding between LATCH system or vehicle seat belts for installation.

D-4 Knowing Your Vehicle Belts

Understanding different types of vehicle seat belts and their compatibility.

D-5 Using a Locking Clip

Guidance on when and how to use a locking clip for secure installation.

D-6 Installing on Aircraft

Information on using the restraint on aircraft.

D-7 Storing LATCH System

Proper methods for storing LATCH system components.

E. Installing Rear-Facing

E-1 Rear-Facing Installation with Base

Installing the base and restraint in a rear-facing position.

E-2 Preparing to Install Base with LATCH

Steps to ready the base for LATCH system installation.

E-3 Installing Base with LATCH

Detailed instructions for installing the base using the LATCH system.

E-4 Installing Base with Vehicle Belts

Procedures for installing the base using vehicle seat belts.

E-5 Rear-Facing Installation without Base

Installing the restraint rear-facing without using the base.

E-6 Installing Child Restraint with Vehicle Belts

Securing the child restraint rear-facing using vehicle belts.

Related product manuals