Using the Top Tether System
The Top Tether System is only used when
the child seat is used in a Rearward Facing
Position.
There are 2 loops on the strap with
the hook. Choose which loop to use
depending on where your Top Tether
Achorage Point is located.
Ensure that the Top Tether Straps are not twisted.
The Hook opening side should be installed downwards.
Lift the headrest upwards
and locate the strap’s
metal brackets.
Twist the brackets
sideways and thread
them through the
backrest.
Remove both straps
from the shell.
Re-thread the straps
through the correct loop
ensuring that the hook
opening is facing
downwards.
Ensure that the buckle
faces outwards.
Thread both straps and
buckles back through
the backrest of the
child seat.
9
To Next Page
Loading...
