To Next PageTo Next Page
Need help?Do you have a question about the Safran MorphoAccess SIGMA Series and is the answer not in the manual?
Describes the terminal's ergonomic interface, access control, and authentication options (fingerprint, card, PIN).
Lists packaging contents and details Micro SD card installation/replacement procedures.
Details the different product variants within the MorphoAccess® SIGMA Series based on card readers and resistance.
Provides a visual guide to terminal connections and details the function of each connector pin.
Specifies external power supply parameters, battery backup, and voltage drop guidelines.
Details Power over Ethernet (POE) capabilities and battery installation, lifetime, and maintenance.
Provides instructions for RS-485 installations, including daisy-chain configuration and cable specifications.
Details RS-422 installations, emphasizing point-to-point configuration and cable requirements.
Explains Ethernet connectivity via RJ-45 and the optional Wi-Fi (WLAN) functionality.
Details Wiegand data connections (Data 0, Data 1, WGND) and maximum cable distances.
Illustrates a wiring sample for Single Door Access Control (SDAC) including push buttons and door strikes.
Explains the internal relay wiring, its current/voltage limits, and cycle life.
Details the First Boot Assistant (FBA) process for configuring fundamental terminal settings.
Explains common icons and menu options available on the terminal's touch screen interface.
Guides on configuring the terminal using the dedicated MorphoBioToolBox (MBTB) Windows application.
Describes how to configure the terminal using its embedded web server via a web browser.
Lists compatible software applications for remote administration of MorphoAccess® SIGMA Series terminals.
Explains the process of adding new users locally to the terminal, including data gathering.
Provides guidelines on region of interest, recommended fingers, and basic acquisition troubleshooting.
Details ideal finger positioning regarding height and angle for optimal fingerprint capture.
Explains correct finger inclination and rotation for optimal fingerprint capture on the sensor.
Details the correct positioning of contactless cards and the process for entering PIN codes.
Offers recommendations on terminal repair, accessories, maintenance, and firmware updates for optimal performance.
Provides references to related documents, including bibliography and firmware release notes.
Lists contact details for technical support and customer service for the MorphoAccess® SIGMA Series.
Describes the terminal's ergonomic interface, access control, and authentication options (fingerprint, card, PIN).
Lists packaging contents and details Micro SD card installation/replacement procedures.
Details the different product variants within the MorphoAccess® SIGMA Series based on card readers and resistance.
Provides a visual guide to terminal connections and details the function of each connector pin.
Specifies external power supply parameters, battery backup, and voltage drop guidelines.
Details Power over Ethernet (POE) capabilities and battery installation, lifetime, and maintenance.
Provides instructions for RS-485 installations, including daisy-chain configuration and cable specifications.
Details RS-422 installations, emphasizing point-to-point configuration and cable requirements.
Explains Ethernet connectivity via RJ-45 and the optional Wi-Fi (WLAN) functionality.
Details Wiegand data connections (Data 0, Data 1, WGND) and maximum cable distances.
Illustrates a wiring sample for Single Door Access Control (SDAC) including push buttons and door strikes.
Explains the internal relay wiring, its current/voltage limits, and cycle life.
Details the First Boot Assistant (FBA) process for configuring fundamental terminal settings.
Explains common icons and menu options available on the terminal's touch screen interface.
Guides on configuring the terminal using the dedicated MorphoBioToolBox (MBTB) Windows application.
Describes how to configure the terminal using its embedded web server via a web browser.
Lists compatible software applications for remote administration of MorphoAccess® SIGMA Series terminals.
Explains the process of adding new users locally to the terminal, including data gathering.
Provides guidelines on region of interest, recommended fingers, and basic acquisition troubleshooting.
Details ideal finger positioning regarding height and angle for optimal fingerprint capture.
Explains correct finger inclination and rotation for optimal fingerprint capture on the sensor.
Details the correct positioning of contactless cards and the process for entering PIN codes.
Offers recommendations on terminal repair, accessories, maintenance, and firmware updates for optimal performance.
Provides references to related documents, including bibliography and firmware release notes.
Lists contact details for technical support and customer service for the MorphoAccess® SIGMA Series.
General| Model | MorphoAccess SIGMA Series |
|---|---|
| Category | Touch terminals |
| Tamper Detection | Yes |
| Authentication Methods | Fingerprint, PIN |
| Fingerprint Sensor | Optical |
| Display | Touchscreen |
| Connectivity | Ethernet, USB |
| Operating System | Linux-based |
| Power Supply | PoE or 12V DC |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 80% non-condensing |
