Saftronics DF8P-15 - User Manual

DF8 PLUS SERIES
¼ to 5 HP
Full Wave Regenerative Reversing
SCR Speed Controls
for DC Motors
CAUTION
Equipment is at possibly lethal AC line voltage when AC power is
connected. Pressing the STOP pushbutton does not remove AC line
voltage. Both phases must be disconnected before it is safe to touch
motor terminals or control equipment parts.
Saftronics, Inc.
5580 Enterprise Pkwy., Ft. Myers, Fl 33905
Telephone: (941) 693-7200
Fax: (941) 693-2431
SAFTRONICS
P/N X010034 REV:5
StockCheck.com

Summary

2.0 Specifications

2.1 Electrical

Specifications for power, speed range, load regulation, acceleration/deceleration, temperature range, altitude, and regenerative braking.

2.2 Electrical Protection

2.4 Adjustments

Guide to factory presets and adjustments for potentiometers RV1 through RV9 for various functions.

2.5 Jumper Selections

Explanation of AC input selection, stopping mode, programmable input, and tachometer feedback configuration via jumpers.

3.0 Receiving & Installation

3.1 Installation

Environmental conditions required for cabinet installation: temperature, altitude, air quality, and clearance.

3.3 Wiring

Instructions for wiring according to NEC, grounding, and motor connection references.

4.0 Startup

4.1 Inspection

4.2 Pre-start Adjustments

4.3 Starting

Step-by-step procedure for applying power, testing motor rotation, and verifying speed settings.

5.0 Troubleshooting

6.0 Wiring Diagrams

6.1 DF8 P-10 & DF8 P-15

6.2 DF8 P-25

6.4 Motor Connections

Saftronics DF8P-15 Specifications

General

Output Current	15 A
Frequency	50/60 Hz
Amps	15 A
Protection Features	Overcurrent, Overvoltage, Undervoltage
Storage Temperature	-20°C to 60°C