To Next PageTo Next Page
Need help?Do you have a question about the Saftronics DF8 PLUS Series and is the answer not in the manual?
General| Output Voltage | 0-Input Voltage |
|---|---|
| Output Frequency | 0-400 Hz |
| Horsepower | 0.5-20 HP |
| Power Rating | 0.5-20 HP |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overload, Short Circuit |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5-95% non-condensing |
Describes the DF8 "Plus" series regenerative four quadrant thyristor controllers for DC motors.
Lists key features like isolated current feedback, dual AC line voltage, and LED indicators.
Details power ratings, speed range, load regulation, and temp/altitude limits.
Covers short circuit rating, fusing, current limit, and surge suppression.
Refers to dimensional information pages for mechanical details.
Explains factory preset adjustments for speed, current, acceleration/deceleration, and stability.
Details jumper settings for AC input voltage, stopping mode, and feedback options.
Specifies environmental conditions required for installing the DF8 Plus cabinet.
Outlines derating requirements for elevated temperatures and altitudes.
Provides guidance on wiring the DF8 Plus according to electrical codes and grounding.
Guides on pre-startup checks including installation and wiring verification.
Details checks for voltage selection plug and jumper settings before applying power.
Step-by-step instructions for applying power and testing motor operation.
Provides wiring diagrams specific to the DF8P-10 and DF8P-15 models.
Presents the wiring diagram for the DF8P-25 model.
Illustrates the wiring for torque control configurations.
Shows various motor connection configurations based on voltage and field type.
Displays dimensional drawings for DF8P-10 and DF8P-15 chassis models.
Shows the dimensional outline for the DF8P-25 chassis model.
Presents the dimensional outline for the NEMA 1 enclosed unit with operator controls.
