2 - OPERATION
Installation and User Guide - N56717020101
Page A2-6
No reproduction or communication without the written consent of
SAGEM SA
Configuration parameters per functional blocks Default
value
OHA : OverHead Access
EOW interface operating mode :
CO (codirectional) or CT (contra-directional master)
"EOW configuration"
CT
Selection of E1/E2"
E1
AUX interface operating mode (F1);
CO (codirectional) or CT (contra-directional master)
"AUX configuration"
CT
MCF : Message Communications Function
MNGT interface operating mode ;
CO (codirectional) or CT (contra-directional master)
"P port configuration" CO
Equipment
Session
Selection of clearance level :
Administrator
Operator
Observer
Admin
One password by clearance level
(Only the administrator may modify password)
No password
Equipment date and time
"01/01/1970"
Status of slots A, B, C, D (slot configured with an expected card)
A, C:ADR21E120
B, D : ADRIC1.x
Monitoring
Monitoring of modules
A no-monitored card is indicated in the equipment view; not monitoring a
card inhibits the entire management of the faults related to this card (card
and port)
No Monitoring
Subrack Monitoring
Monitoring
Monitoring of ports
Not monitoring a port inhibits the entire management of the faults related to
this port
Monitoring
for physical port
No Monitoring
for performance
Putting a card into/out of service
(The card is ignored by the management function)
Service
Table 2-5 – Configuration parameters (5/6)
To Next Page
Loading...