Test Sheet 01 1/9
myC5-2
TEST AND CHECK BY SMT
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 4-33
To run the functions described below, run the SMT application from the desktop icon.
Notice: The active connection with SMT ( via the serial port ), validate in itself the data functionality
of the handset.
Download the latest software
1. Click on DOWNLOAD button.
2. Follow the procedures on the screen.
3. Make sure that the mobile phone is not in the sleep mode (press the Start key)
Configure and check default values
1. Click on the CONFIGURE popup menu and then VERIFY (Verfab).
2. Follow the procedures on the screen.
Release the " POST CODE"
3. Click on the CONFIGURE popup menu and then on RELEASE
4. Follow the procedures on the screen.
Print identification labels
5. Click on the on LABEL popup menu and then PRINT LABEL .
6. Follow the procedures on the screen
Audio parameters setting
7. Click on the AUDIO popup menu
8. Follow the procedures on the screen
To Next Page
Loading...
