Technical Site Documentation myC5-2
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 5-1
CHAPTER 5 - MAINTENANCE PROCEDURES
23. TECHNICAL WORK LEVELS
There are four technical work levels:
− Level 0,
− Level 1,
− Level 2,
− Level 3.
Each level represents a maintenance degree that depends on which elements are to be removed.
Note: Presence or use on the radiotelephone of non genuine element (material and software) leads
automatically the exclusion from SAGEM warranty
Maintenance procedure sheets are coded as follows :
Proc Sheet X XX
Maintenance type sheet Numbering
Maintenance level
Level 0 Level 1 Level 2 Level 3
Replace defective
subassemblies
without
opening the mobiles
with tools
Return to SAGEM SA
OUT OF WARRANTY
Electronic
intervention on the
data/ audio/ charge
connector only
Replace defective
subassemblies
with
opening the mobiles
with tools
To Next Page
Loading...
