Test Sheet 05 1/1
myC5-2
RADIO TEST
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 4-45
Test description
This test tests myC5-2 phones during a call.
Required tools
− A Wavetek
− A RF coupler
− A myC5-2 calibration tool
−
Test procedure
1. Position the calibration tool first on the RF coupler to calibrate it
2. Position the myC5-2 module on the RF coupler
3. Switch the Wavetek on and press on "AUTOTEST".
4. Choose the corresponding program using the "UP" and "DOWN" arrows.
Mobile :myC5-2
Frequency range : GSM, DCS or GSM/DCS,
Coupling type : ANTENNA.
5. Press on "ENTER" and wait until the end of the calibration.
6. Follow the instructions shown on the Wavetek.
To Next Page
Loading...
