Proc Sheet 1 01
myC5-2
REMOVING / REPLACING BACK COVER
1/2
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 5-12
4.16 Tools :
- Cross shaped screwdriver
4.17 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01).
4.18 Removal procedure :
1. On the back cover (1), unscrew the three attachment screws (2) and the antenna attachment screw (3).
2. Lift delicately the back cover (1) up beginning by the back side
3. Remove rear cover (1)
4.19 Placement procedure :
1. Replace the back cover (1) by engaging top hooks first .
2. Push down back of rear cover and screw the three attachment screws (2) and the antenna attachment screw (3)
with 0,08 N.m torque.
4.20 Further operations :
1. Replace the battery pack ( Proc sheet 0 01)
To Next Page
Loading...
