Sagem myC5-2 - Care and Safety Information; General Safety Precautions


Proc Sheet 1 03
myC5-2
REMOVING / REPLACING THE BATTERY
COVER LOCK
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 5-16
4.26 Tools :
- Cross shaped screwdriver
4.27 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01).
2. Remove the back cover ( Proc sheet 1 01).
4.28 Removal procedure :
1. Remove the battery cover lock (1) by pushing on the two stop pins with tweezers
2. Remove the battery cover lock and the lock spring (3) on the back cover (2)
4.29 Placement procedure :
1. Position the lock spring (3) in its housing (2)
2. Position the battery cover lock (1) in its housing (2)
4.30 Further operations :
1. Replace the back cover ( Proc sheet 1 01).
2. Replace the battery pack ( Proc sheet 0 01).
3. Carry out the radio test (Test Sheet 04).