Sagem myC5-2 - Warranty Information; Usage Precautions and Warranty Terms


Proc Sheet 1 04
myC5-2
REMOVING / REPLACING THE ANTENNA
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 5-18
4.31 Tools :
- Cross shaped screwdriver
4.32 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01).
2. Remove the back cover ( Proc sheet 1 01).
4.33 Removal procedure :
1. On the back cover, unscrew the attachment screw (2) of the antenna (1)
2. Remove the antenna (1)
4.34 Placement procedure :
1. Position the antenna (1) in its housing
2. screw the attachment screw (2) with 0,1 N.m torque.
4.35 Further operations :
1. Replace the back cover ( Proc sheet 1 01).
2. Replace the battery pack ( Proc sheet 0 01).
3. Carry out the radio test (Test Sheet 04).