Proc Sheet 1 07
myC5-2
REMOVING / REPLACING THE FRONT FLIP
COVER
1/2
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 5-24
4.46 Tools :
- Cross shaped screwdriver
- Tweezers
- Flat screwdriver
4.47 Preliminary operation :
4.48 - Switch off the mobile phone
4.49 Removal procedure :
1. Remove the four screws covers (3) on the lower flip (1) by piercing them at the centre with tweezers and by acting
as a lever.
2. On the back flip cover (1), unscrew the four attachment screws (4) .
3. lift the front flip cover (1) up with a flat screwdriver beginning by the hinge side (5)
4. Remove the audio gasket (5)
5. Remove the front flip cover (2)
4.50 Placement procedure :
1. Replace the front flip cover (2) by engaging top hooks first .
2. Push down back of front flip cover (2) into locked position
3. Position and tighten the four attachments screws (4) with 0,08 N.m torque.
4. Position news screw covers (3) on the back flip cover (1)
To Next Page
Loading...
