Sagem myC5-2 - Page 88


Proc Sheet 1 11
myC5-2
REMOVING / REPLACING THE LOUSPEAKER
1/2
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005 Page 5-33
4.67 Tools :
- Cross shaped screwdriver
- Soldering iron
- Solder wick
- Flat screwdriver
4.68 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01).
2. Remove the front flip cover ( Proc sheet 1 07).
4.69 Removal procedure :
1. Unstuck the loudspeaker (1) of the back flip cover (2) with a flat screwdriver
2. Unsolder the loudspeaker (1) on the equipped display (2)
3. Remove the loudspeaker (1)
4.70 Placement procedure :
1. Flux the place of the loudspeaker (1) and solder it on the equipped display (2), respecting the wiring sense
2. Position the loudspeaker (1) in its housing
4.71 Further operations :
1. Remove the front flip cover ( Proc sheet 1 07).
2. Remove the battery pack ( Proc sheet 0 01).