Modifying the Connection Hub settings
You can manually configure settings on your Connection Hub. To access
and modify these settings:
1. Open your web browser.
2. Type 192.168.2.1 in the address bar, and then press Enter. If you are
prompted to enter in a username and password, these are set to the
following defaults:
Username: admin
Password: admin
If you have changed the default password, you must enter in that
password.
The first screen will provide you with information about your network and
the ability to set various options and adjust settings. You can access and
modify the details of the settings through the menu on the left.
To Next Page
Loading...
Need help?
General
