Quick Start Guide Internet Radio RM50
- 6 -
AP List
(1) Press the Wheel to select the AP list menu.
(2) Select a desired network from the list.
Note: If you have selected a network with a lock icon at the front, you must
enter the password for the selected network.
On the text entering screen, rotate the Wheel to choose the characters or
numbers from the list at the bottom of the screen. Press the Wheel to select the
character.
Rotate the Wheel to select End to quit the edit screen and start connecting to the
network.
WPS
The IP Radio supports WPS (WiFi Protected Setup). If your AP supports WPS as
well, you can choose this network connecting method.
WPS PBC (Push Button Configuration):
(1) Press the WPS button on your AP.
(2) Select WPS PBC on the menu within the time limit (AP dependent) to establish
a connection.
WPS PIN (Personal Identification Number): Use the PIN code to connect to
the AP.
(1) Select WPS PIN on the menu.
(2) The PIN code is generated automatically or you can choose Refresh if you
need to change the PIN code.
QG RM50 Print.fm Page 6 Lundi, 19. avril 2010 9:30 09
To Next Page
Loading...
Need help?
General