Internet Radio RM50 Quick Start Guide
- 7 -
(3) Open the WPS configuration page of your AP on your computer, and then
enter the PIN code to establish a connection.
Connection Established
If the network connection is established, continue adjusting the following
settings:
Language
The device will automatically set up the local language. If you need to set up your
own preferred display language on the device see step (1).
Choose YES to confirm the language selection.
(1) Choose NO to continue the Language setting.
(2) Rotate the Wheel to choose the desired Language.
(3) Press the Wheel to activate the setting.
Time Zone
Select your time zone in the device to synchronize the date and time with the
Internet. The device will automatically set up the local time zone.
Choose YES to confirm the Time zone selection.
(1) Choose NO to continue the Time zone setting.
(2) Rotate the Wheel to choose your time zone.
(3) Press the Wheel to activate the setting.
After the Network, Language and Time Zone settings are set, the menu screen will
be displayed.
QG RM50 Print.fm Page 7 Lundi, 19. avril 2010 9:30 09
To Next Page
Loading...
Need help?
General