RTI95 T2 HD UK
49
Appendix
SD INPUT/OUTPUT
SCART (TV setup configuration)
RGB out, PAL in/out, volume control Audio R/L, Fast
blanking out, Slow blanking out
SCART (Recorder setup configuration)
RGB in, PAL out, S-Video out, fixed volume Audio R/L,
Slow blanking out
HDMI OUTPUT
HDMI 1.3 and HDCP 1.1
VIDEO: YCrCb
AUDIO
•
2 channels PCM in case of MPEG1-layer II
•
Dolby Digital or PCM in case of AC3 beat stream (*)
•
Dolby Digital Plus, Dolby Digital or PCM in case of
E-AC3 beat stream (*)
(*) according of E(EDID) information
AUDIO OUTPUT
HiFi audio output
Adjustable audio level
•
Mono/Stereo in case of MPEG1-layer II
•
Two channels down mixed in case of AC3, E-AC3,
HEAAC audio stream
Coax S/PDIF
Stereo audio setup:
Fixed audio level -20 dBLKFS
•
Two channels PCM in case of MPEG1-layer II or AAC
stream
•
Two channels PCM down mix in case of
AC3/E-AC3/HEAAC streams
Multichannel audio setup:
Fixed audio level -31 dBLKFS
•
Two channels PCM in case of MPEG1-layer II or AAC
stream
•
Originally received bit stream in case of AC3
•
Transposed AC3 in case of E-AC3
FRONT PANEL
1 x 4-Digit 7-segment LED display
1 x IR sensor: 38 kHz
1 x Bicolour LED
3 x Buttons (P+,P-, Standby)
1 x USB 2.0 connector (Type A Host)
REAR PANEL
1 x RF input (IEC169-24-F)
1 x RF input (IEC169-24-M)
1 x RJ45 (Ethernet 10/100BT)
1 x SCART (IEC60807-9)
3 x RCA (Stereo L/R, S/PDIF)
1 x HDMI with HDCP
POWER SUPPLY
External AC/DC adapter
Mains supply voltage: 220-240 V ~50 Hz
Max. Power consumption: < 13 W
Standby consumption: < 1 W
PHYSICAL SPECIFICATIONS
Recorder:
Size (wxdxh): 260x160x48 mm
Weight: ~0.8 Kg
Operating temperature: 0°C to +40°
Storage temperature: -25°C to +65°C
ACCESSORIES
1 x External AC/DC adapter + Power cord
1 x Remote control
3 x AAA batteries
1 x HDMI cord (1.5 m)
1 x User manual
1 x Installation guide
1 x Retune guide for switchover in uk
LU 253463441-A RTI95 T2 HD UK.book Page 49 Mercredi, 1. février 2012 10:59 10
To Next Page
Loading...
