To Next PageTo Next Page
Need help?Do you have a question about the Sagi IF51M and is the answer not in the manual?
Guidelines for placing the appliance in a suitable location for installation and operation.
Detailed technical specifications of the appliance models.
Explanation of the appliance's control interface and buttons.
Detailed descriptions of various chilling and freezing programs.
How to change the user interface language.
Procedure for setting the appliance's date and time.
Information about appliance alarms and how they are signaled.
A list of fault codes, their causes, and remedies.
List of European and national regulations the appliance complies with.
Procedures for safely moving and handling the appliance during transport.
Steps to unpack the appliance and verify its contents and condition.
Information found on the rating plate, including technical specifications and model details.
Recommended maximum ambient temperature for optimal appliance performance.
Guidelines for placing the appliance in a suitable location for installation and operation.
Specifies required space around the appliance for air circulation.
Detailed diagrams showing the physical measurements of different models.
Comprehensive table of technical specifications for various appliance models.
Information on electrical connections and safety requirements.
Steps for verifying the appliance's functionality after installation.
Description of internal components that ensure safe operation.
Safety information regarding the refrigerant used in the appliance.
Guidelines for the environmentally responsible disposal of the appliance.
Instructions for installing optional sterilization lamp or printer.
Introduction to the blast chiller's function and capabilities.
Initial steps and considerations before operating the appliance.
How to properly load food products into the appliance for chilling/freezing.
Information on using the core probe for accurate temperature measurement.
Recommended temperatures and considerations for chilling/freezing.
Information on storage duration and conditions for processed food.
Explanation of the appliance's control interface and buttons.
Description of the RGB LED bar colors and their meanings.
Initial language selection for the user interface.
Initial sector configuration for the appliance.
Descriptions of pre-set chilling and freezing cycles.
Pre-defined programs for catering applications at +3°C and -18°C.
Programs for chilling and freezing in pastry shop applications.
Programs for chilling and freezing in bakery applications.
Programs for chilling and freezing in ice cream parlour applications.
Steps to choose and activate standard chilling/freezing cycles.
How to view and temporarily modify parameters during a cycle.
Explanation of the patented positive blast chilling system.
Steps to select and run the I.F.R. program.
Description of the time chilling/freezing cycle with infinite duration.
Steps to select and run the INFINITY program.
Steps to select and activate stored favorite cycles.
How to save selected cycles to the favorites library.
Steps to navigate and select manufacturer recommended automatic work cycles.
Selecting the type of cycle and quantity of load for automatic programs.
Steps to activate an automatic program and its conservation phase.
Steps to select and activate pre-configured stored chilling/freezing cycles.
How to modify default settings and save them for stored programs.
Procedure to assign a custom name to a stored cycle.
How to designate a stored cycle as a favorite.
Description of the time-based chilling/freezing cycle organised by load levels.
Steps to enter and confirm time for each level in the Multy program.
Steps to activate the cooling function before other cycles.
Steps to activate and manage the defrost function.
Steps to activate and manage the sanitation function.
Steps to activate and manage the storage function.
Steps to activate and manage the thawing function by probe or time.
How to adjust the date and time for time-based thawing cycles.
Steps to activate and manage direct or scheduled leavening cycles.
How to adjust the date and time for leavening cycles.
Steps to activate the probe heating function.
Indicates when the probe heating function will not be activated.
Steps to access and view the list of adjustable cycle parameters.
How to change specific parameters for a running cycle.
Steps to view recorded HACCP data by date or cycle.
Steps to print HACCP data by date or cycle.
How to view HACCP records filtered by date range.
How to view HACCP records filtered by specific cycles.
How to print HACCP records filtered by date range.
How to print HACCP records filtered by specific cycles.
Procedure to print all available HACCP data.
Steps to download HACCP data filtered by date.
Steps to download HACCP data filtered by cycle.
Procedure to download all recorded HACCP data.
Steps to delete HACCP data filtered by date.
Steps to delete HACCP data filtered by cycle.
Procedure to delete all recorded HACCP data.
Final step to confirm the deletion of all HACCP data.
Steps to select and set the desired language for the display.
Procedure for configuring the internal clock and date of the appliance.
Procedure to choose the appropriate operational sector (e.g., catering, pastry).
Steps to select the number of levels for the Multy program.
Option to choose between automatic or manual control for cycles.
How appliance alarms are signaled and stored.
A comprehensive list of faults, their causes, and recommended remedies.
Procedure to clear active alarms from the system.
How to check the status of various input and output signals.
Procedure to reset the appliance to its original factory parameters.
How to access and modify service parameters, requires password.
Daily procedures for cleaning the interior and exterior of the cooling cabinet.
Instructions for cleaning the air condenser to maintain performance.
Guidelines for cleaning and maintaining stainless steel parts.
Steps to follow when the appliance is disconnected for extended periods.
Maintenance procedures for the video board and encoder components.
Procedures for accessing and maintaining the appliance's control panel board.
Steps to update the appliance's firmware using a PC.
Procedures to access and maintain the condensing system.
Instructions for replacing the core probe of the appliance.
Indicates where to find the electrical diagram for the appliance.
General
