To Next PageTo Next Page
Need help?Do you have a question about the Sagi KP8Q and is the answer not in the manual?
Instructions for safely lifting, moving, and placing the unit.
Guidance on positioning the unit and adjusting levelling feet for stability.
Requirements for unit placement regarding distance from walls and heat sources.
Explains the function of each button on the control panel.
How to set and adjust the desired temperature for the unit.
Description of quick-access functions for efficient operation.
Procedure to lock or unlock the control panel keyboard.
How to read sensor data and manually print it.
Guide to accessing and modifying unit parameters.
Process for configuring user-specific parameters and reading probes.
Procedure to reset all parameters to factory default settings.
Parameters related to sensor readings and digital inputs.
Parameters for adjusting compressor operation and hysteresis.
Parameters related to compressor safety and delays.
Parameters controlling the defrost cycle operation.
Parameters for configuring alarm thresholds and behavior.
Parameters for controlling evaporator fan operation.
Parameters related to printing functions and data output.
Parameters for managing serial port and data transmission.
Error codes and behavior when sensor probes are faulty.
How the unit indicates and records high/low temperature deviations.
Indication and recovery process after a power failure.
Alarm triggered by the door being left open.
Alarms for high condensation temperature and dirty condenser.
Alarms for high or low system pressure.
Alarm when defrosting does not complete in the expected time.
How to manually initiate and stop the defrost cycle.
How the unit performs automatic defrost cycles.
Specific instructions for cleaning the condenser unit.
Guidelines for disposing of electrical and electronic equipment.
General
