Sagitter FLOORBAT PLUS - IR Remote Control Operation

61
6.5 – IR WORKING MODE
By setting the projector in IRC mode (OPERATE MODE – CONTROL MODE – IRC) the projector
can be controlled by using the IR remote controller included in the carton.
WARNING: The settings given via remote control are only temporary. This means that
when the projector is switched off, the settings will be lost.
Working modes settings:
- Auto mode and speed
- Sound and sensitivity
- Black-out
Single color settings in manual mode
Intensity +/- settings for manual mode or
speed for Auto mode and strobe or mic
sensitivity for Sound mode
Color macro settings in manual mode