SAH ABT-60 - User Manual

Questions and Answers

M
mikayla08Aug 10, 2025
Why is my SAH ABT-60 alarm going off intermittently?
- A
  Angela LambertAug 10, 2025
  An intermittent alarm in your SAH Accessories could be due to several factors. It may be caused by a bad wiring connection, so check the wiring. Changes in supply voltage can also trigger it, so ensure you have a stabilized voltage. Blocking objects blowing between the transmitter and receiver or unstable sensor mounting could be the culprit; in this case, remove the blocking objects, change the installation location, or stabilize the mounting. Readjust the optical axis if there's marginal alignment or relocate the installation if birds or other large flying objects are interrupting the beams.
P
Peter HarperAug 14, 2025
What to do if the alarm LED on the SAH ABT-60 receiver does not turn off?
- M
  Michael RiceAug 14, 2025
  If the alarm LED on your SAH Accessories receiver doesn't turn off, it could be caused by several reasons. The optical axis might not be aligned, so readjust it. There may be a blocking object between the transmitter and receiver, so remove any obstructions. The cover or reflecting mirror at the transmitter and/or receiver could be dirty, so clean the optics with a soft cloth.
D
Douglas DavisAug 20, 2025
Why doesn’t my SAH ABT-60 Accessories alarm sound even when the Alarm LED is lit?
- T
  Teresa ChapmanAug 20, 2025
  If the Alarm LED lights when the beams are blocked, but the alarm doesn’t sound on your SAH Accessories, it could be due to broken or shorted alarm output wires; check the wiring. Alternatively, a fuse on the signal circuit may have blown, so repair as required.
D
Debbie KimAug 26, 2025
How to fix SAH ABT-60 Accessories transmitter LED if it does not light?
- A
  Amanda ThompsonAug 26, 2025
  If the transmitter LED on your SAH Accessories does not light, it is likely due to an improper voltage supply. Check the power supply and wiring.
G
garciakelseyAug 29, 2025
How to troubleshoot SAH Accessories receiver power LED not lighting?
- T
  tsmithAug 29, 2025
  If the receiver power LED on your SAH Accessories does not light, it is likely due to an improper voltage supply. Check the power supply and wiring.
T
Thomas BerrySep 4, 2025
What to do if Alarm LED on SAH Accessories doesn't light when the beam is blocked?
- D
  Dean GreenSep 4, 2025
  If the Alarm LED does not light, even when the Infrared beam from the transmitter is blocked on your SAH Accessories, remove any reflecting objects or change the installation location and optical axis direction.

SAH ABT-60 Specifications

General

Brand	SAH
Model	ABT-60
Category	Accessories
Language	English

SAH ABT-60 - User Manual

Table of Contents

Questions and Answers

SAH ABT-60 Specifications