5.
Th
e soldering station, Hot air rework's temperature are using Intelligent
Fu
zzy
PID control, the exact LED digit
al
display temperature
of
hot air rework and sol-
dering iron. The program keep tracking
of
the actual temperature
of
hot
air rew-
ork and soldering iron, temperature compensation very quickly, this will further
enhanced temperature stability. Therefore the temperature steady-state error
is
relatively small, temperature compensations quickly and can adapt to all kinds
of
harsh environment
..
6. Hot air rework with sensor switc
h,
as long as hand grip the handle, the system
can enter into working mode quickly; ha
nd
le released into the handle frame, the
system will enter into standby mode, operating convenienc
e,
it can prolong he-
ating elements life and protect the hot air gun.
7. Hot air gun use for high-quality heating elements, in the same power, its efficie-
ncy can be arrive doubled, which can effectively extend th e service life
of
heati-
ng elements and
po
wer savings. Outlet way is brushiess fan gentle wind
an
d di-
aphragm pump spiral wind, two type for your choose. It has long life,minimal no-
ise and air volume can
be
adjusted continuously.
8. Soldering iron with anti-static design, to prevent electrostatic damage to the de-
li
cate
SM
D components.
9. Power supply part
of
the recovery with continuous protection and
RF
protection,
to avoid various unexpected burning mobile the phenomenon
of
interference.
10. USB type is equiped with USB output port, it is convenient for mobile phone's
connection. The current indication is changed into LED display, output current
accuracy to 1 mA, to satisfy high level users.
11. This products not
on
ly using for repair mobile phone, it is can
be
testing the vo-
Itage and mobile
RF
signal. Through LED to shows the mobile
RF
signal inform-
ation .
12. It is easy to operate, you do not need any switch button to operate the machine.
8
To Next Page
Loading...