Need help?Do you have a question about the Sailfish 220 CC and is the answer not in the manual?
Technical details of the Sailfish 220 CC boat, including dimensions and capacity.
Core components and systems included as standard on the Sailfish 220 CC.
Various optional upgrades and packages available for the Sailfish 220 CC.
Location and function of the livewell and bilge access points on the boat.
Location of fuel fill, fuel sender, and fresh water fill points.
Location of the boarding ladder and leaning post/seating.
Overview of the helm station and console area components.
Identification of fish boxes, floor storage, and anchor locker.
Switches for controlling accessory power (ACCY 1 & 2) and other electrical functions.
Switches for bilge pump activation and raw water washdown system.
Switches for livewell pump, deck lights, and navigation/anchor lights.
Switches for the boat horn and fresh water system pump.
Overview of the breaker panel and its primary circuit protection systems.
Breaker protection for accessory circuits, deck lights, and navigation lights.
Breakers for bilge, washdown, baitwell pumps, and engine systems.
Breakers for trim tabs, helm lighting, and 12-volt receptacles.
Identification of fuel filter access and fuel pickup points.
Location of the fuel fill port and the fuel sender unit.
Location and function of primer bulbs for Yamaha engines.
Diagram showing the location and function of bilge and livewell pumps.
Layout of deck drains, livewell drain, and transom washdown pump.
Diagram illustrating the fresh water pump and fill/vent locations.
Identification of compass, motor gauges, and binnacle controls.
Location of the main switch panel and trim tab actuator switches.
Ignition switches, emergency shut-off, and tilt helm mechanism.
12-volt receptacle and storage pocket within the helm console.
Proper use of the emergency engine shut-off cord and lanyard.
Importance and procedure for breaking in a new outboard motor.
Large panel for accessing console components and wiring.
Identification of the breaker panel within the console area.
Storage area for a porta potti located in the front of the head.
Location of the large door providing access to the boat's bilge.
Alternative access points to the bilge through splash-well plates.
Location of the battery selector switch and battery storage area.
How to operate the raw water washdown and where to access the pump.
Identification of the hose fitting for the washdown in the transom splash well.
How the freshwater system operates and the need to prime it.
Location of the freshwater holding tank fill port.
Recommended methods for cleaning stainless steel trim tab blades.
Importance and maintenance of sacrificial anodes on trim tabs.
Regular checks for wires, brackets, and overall system functionality.
Steps for preparing the Porta Potti unit before use.
Precautions and steps before flushing the Porta Potti.
Instructions on how to flush the Porta Potti using different flush types.
Recommended deodorants and cleaners for Porta Potti maintenance.
Information on obtaining service and parts for the Porta Potti.
Step-by-step guide for safely emptying the Porta Potti waste tank.
Recommended deodorants for managing waste tank odors.
Recommended cleaning agents for the Porta Potti waste tank.
Contact information for service and warranty issues related to the waste tank.
Description of the T-Top's Weblon canvas material.
Details regarding the spreader light integrated into the T-Top.
Location and purpose of the life preserver holder on the T-Top.
Guided instructions for removing various types of stains from vinyl surfaces.
Recommended and prohibited cleaners and methods for vinyl care.
Explanation of chemical and electrochemical reactions causing aluminum corrosion.
How anodizing protects aluminum and what damages the coating.
Effects of corrosive chemicals like acids, alkalis, and chlorine on aluminum.
Advice on avoiding bleach, chlorides, and abrasive cleaners for aluminum.
Overview of available products for sealing and protecting aluminum surfaces.
List of common household and marine cleaners detrimental to aluminum.
Explanation of chromium, nickel, and molybdenum in stainless steel.
How stainless steel can rust or discolor and how to address it.
Information on stainless steel recyclability and environmental friendliness.
Proper cleaning methods for glass and plastic windshields.
Cleaning instructions for window channels and polishing stainless steel.
Care for painted surfaces, touch-up paint, and vent adjusters.
Maintaining the shine and color of the gel coat finish.
Recommended methods for cleaning and waxing gel coat surfaces.
Using compounds and addressing discoloration on gel coat.
Procedures for repairing minor damage like scratches and gouges in gel coat.
Methods for refinishing severely scratched or weathered fiberglass surfaces.
To Next Page
General
