01/20/2015 Sailsh220CCOwner’sManual|sailshboats.com 18
Freshwater Washdown and
Shower System
The freshwater washdown and shower system on your Sailsh
Boat is powered by a Shur-o Pro Blaster Pump which creates a
pressurized system, once the pump is turned on and pressure is
created throughout the freshwater hoses; once they are all pres-
surized the pump will shut down until more pressure is needed.
All of the freshwater systems on the boat will operate on this
system once the freshwater switch is engaged.
You should allow a few seconds for the system to prime and
pressurize before attempting to use any of the showers/sinks ect.
The freshwater holding tank is located behind the fuel tank in the
bilge area.
The ll for this tank is located under the boarding latter on the
port side of the vessel. The freshwater pump can be accessed
through the bilge access door in the aft of the vessel.
Sailsh 220 CC
Key Description
1 Freshwater Fill
q