Ultrafeed Maintenance
Lubrication
The machine was thoroughly oiled prior to shipment� Oil all metal-to-
metal working parts frequently!
After oiling, briey sew with scrap material to prevent soiling your work.
For good maintenance of your machine, you should oil it approximately
every 8 hours of use, before it is put in storage, or anytime the machine
sounds like it is running roughly�
Sailrite recommends Sailrite
®
Sewing Machine Oil for oiling and
maintaining the Ultrafeed Sewing Machine� With regular use, this
highly rened mineral oil will help your machine operate more
smoothly, last longer and sew more quietly�
LS Lubrication Points
Top side lubrication points
Speed Reduction Pulley
Under Belt Cover
44
45
Marine Use & Potential for Rust
If the machine will be used or stored in a harsh environment, lubricate the
working parts of the machine with Sailrite
Sewing Machine Oil prior to
storage and before each use�
We also recommend using Boeshield
®
T-9, a parafn-based protectant,
to protect metal surfaces and control knobs� Use even on the painted
surfaces, metal parts, needle plates and presser feet�
Boeshield T-9 leaves a thin protective layer of wax� Use sparingly as a
lubricant as wax buildup can create gumming friction over time�
27 | Sailrite�com Ultrafeed
®
LS Guidebook | 28
To Next Page
Loading...
