Need help?Do you have a question about the Sailrite Craftool Pro Stitch Master and is the answer not in the manual?
Safety guidelines for the Workhorse Servo Motor to prevent injury or damage.
Specifies safe operating conditions, power, temperature, atmosphere, and cord handling.
Step-by-step guide to assembling the machine's legs, base, and treadle.
Attaching the idler pulley, flywheel, and timing belts for the drive system.
Securing the motor to the tabletop and placing the sewing machine head.
Includes linkage bar, oil tray, hinges, covers, light, and spool pin.
Guidance on choosing appropriate thread and needle types for sewing.
Instructions for winding bobbins and installing them in the machine.
Detailed steps for threading the sewing machine, including bobbin.
Initial steps and considerations for beginning to sew with the machine.
How to regulate stitch length, thread tension, and presser foot pressure.
Covers reverse sewing, turning corners, and motor speed adjustment.
Proper oiling procedures and identification of lubrication points on the machine.
Solutions for marring or damage to sewing materials.
Procedures for cleaning the hook, timing, needle bar height, and hook/driver gap.
Diagnosing and resolving thread shredding, breaking, and needle problems.
Troubleshooting bobbin winding and belt slipping problems.
Machine specs, servo motor error codes, and speed settings.
Information on the machine's warranty, support, and service policies.
General| Type | Walking Foot Sewing Machine |
|---|---|
| Brand | Sailrite |
| Model | Craftool Pro Stitch Master |
| Stitch Type | Lockstitch |
| Max Stitch Length | 6mm |
| Motor Type | Servo Motor |
| Tension | Adjustable |
| Clearance Under Presser Foot | 1/2 inch |
| Stitch Width | 0mm |
| Thread | Heavy-duty |
| Material Handling | Heavy fabrics, leather, canvas |
To Next Page
