To Next PageTo Next Page
Need help?Do you have a question about the Saito FA-100 and is the answer not in the manual?
Provides essential safety guidelines for operating the engine safely and preventing injury or damage.
Details how to properly disassemble the engine and advice for repairs.
Lists and describes essential equipment needed to operate the engine.
Explains the critical steps for the initial break-in period to ensure engine longevity and performance.
Outlines the step-by-step process for safely starting the Saito engine.
Details how to adjust the idle speed on two-needle carburetors for optimal performance.
Provides instructions for adjusting air bleed carburetors, common on specific Saito models.
Covers secure engine mounting and general operating procedures for extended engine life.
Guides on how to disassemble and reassemble the engine for maintenance, emphasizing qualified individuals.
Explains how to adjust the valve/tappet gap for optimal engine performance and longevity.
Provides steps for maintaining the carburetor, including cleaning and reset procedures.
Offers recommendations to ensure the longest possible life for your Saito engine through proper care and usage.
Guides users on initial checks to perform when the engine fails to start.
A chart to help select the best propeller for initial setup of your Saito engine based on engine type and flying style.
General| Type | 4-stroke |
|---|---|
| Air-cooled | Yes |
| Single-cylinder | Yes |
| Fuel System | Carburetor |
| Lubrication System | Wet sump |
| Fuel Type | Gasoline |
| Practical RPM | 2, 000 - 10, 000 RPM |
