28
state of the ice.
III .COMPONENTS ’NAMES
1. Transparent window
2. Cover
3. Operation panel
4. Wind outlet
5. Wind inlet
6. Power cord
7. Water outlet
8. Ice storage box
9. Evaporator
10. Ice making box
IV .PLACE ENVIRONMENT
1. The ice machine should be used on a flat place.
2. Away from heating and avoid direct sunlight,so as not to affect the
ice-making perfor mance.
3. The machine should be placed in well-ventilated place ,out of
cooling air ice
machine around 20cm or more space should be left.
4. Do not put use of it in too cold(below 5ºC）environment.
5. Do not use the ice machine outdoor.
V .PREPARING BEFORE USE
1.Remove all packaging components.
2.Inventory of accessories and information.
3.Placed the ice machine in the right place.
4.Better to clean it before use.
VI .BEGIN TO USE
1 .Power on it at first , after move the ice machine ,please let it
standby 3 0
minutes before power on I againt;
2.Pour water into the water storage box for ice making use(allow
FHS 2012.indd 28 4/18/2016 4:51:17 PM
To Next Page
Loading...