31
is over 0.8MPa, this valve will automatically leak the pressure. It may exist the water drops to fall
down at the pressure leakage mouth sector. In any conditions, this pressure leakage mouth must
not to be blocked. You must keep it anti-through with the atmosphere.( Diagram 1)
Note: For the interior-ventilating styled security valve, its pressure leakage exit sector may not exits
the water drops to drip down. Otherwise, during the heating procedure, the water-entering pipe’s outer
cover under the safety valve may have a certain temperature. This belongs to the normal conditions. This
indicates that it is internally-draining the leakage pressure.
To drain the tank perform the following steps :
(Diagram 2)
Diagram 1 Diagram 2
TECHNICAL REFERENCE DATA
RATED VOLTAGE 220-240 V~ RATED POWER 2000W
RATED FREQUENCY 50/60HZ RATED VOLUME 30L, 50L,80L,100L
RATED PRESSURE 0.8MPA HEATING EFFICIENCY >90%
RATED WATER TEMPERA
TURE
75℃
STRUCTURE MODE HERMETICALLY CLOSED
TYPED WATER STORAGE
STYLE
IPX4 FIXING MODE HANGING TYPE
PRODUCT STRUCTURE
Diagram 3 Diagram 4
water heater.indd 312018/12/12 11:28:10
To Next Page
Loading...
