What to do if my Saje Aroma art Respiratory Product has no power?
If your Saje Respiratory Product isn't powering on, there are a couple of things to check: First, ensure the adapter is correctly plugged in. Second, make sure the mist on/off button is pressed.
Why is my Saje Aroma art Respiratory Product producing little to no mist even when the water tank is full?
There are several reasons why your Saje Respiratory Product might produce little or no mist even when the water tank is full: * The transducer may be dirty, in which case you should clean it. * The water level may be too high; pour out any excess water to ensure it's below the maximum line. * There might be an obstruction on the vent; remove any obstacles.
General| Product Type | Ultrasonic Diffuser |
|---|---|
| Usage | Aromatherapy |
| Water Capacity | 100 ml |
| Power Source | AC adapter |
| Operation | Ultrasonic |
| Coverage Area | Up to 500 square feet |
| Run Time | Up to 8 hours |
| Auto Shut-off | Yes |
Details the functions of the light and mist setting control buttons.
To Next Page
