To Next Page
S
Shawna FarrellJul 29, 2025
What to do if my Saje Respiratory Product has no mist?
- JJulie SnyderJul 29, 2025
If your Saje Respiratory Product isn't producing mist, ensure the power adapter is correctly plugged in and the power button is pressed. Also, check if the signal sensor is covered by furring and clean it with a swab. Make sure that the water level is sufficient and does not exceed the maximum water level line. Finally, verify that covers A and B are free from any blockages caused by dirt or residue; clean them with a swab to ensure clear exit points.
General
Weight and Dimensions
