- 5 -
Preparing Your Camera for Use
Battery Installation
Your camera requires three AAA alkaline batteries, which must be inserted as follows:
z Using a screwdriver, open the battery compartment at the bottom of the camera.
z Insert the batteries in accordance with the polarity (+/-) shown in the battery
compartment.
z Close the battery compartment and replace screws tightly.
The LCD screen will flash if your batteries are running low. You will need to replace the camera’s
batteries before taking photos. Download your photos as often as possible. Photos may be lost when
the batteries run low.
Tips: Insert the battery correctly and close the battery compartment as following diagram and
descriptions:
To Next Page
Loading...
