Need help?Do you have a question about the salav GS24-BJ and is the answer not in the manual?
General| Brand | salav |
|---|---|
| Model | GS24-BJ |
| Category | Steam Cleaner |
| Language | English |
Ensure voltage matches appliance. Do not share power with other high-powered devices.
Do not immerse appliance, plug, or cord in water or liquids.
Do not leave unattended, lay hose on ground, wind hose, or extend cord/hose.
Keep hose elevated, do not direct steam at people/animals, use only in vertical motion.
Cool down completely before moving, draining, or storing. Always unplug before maintenance.
Indoor use only. Keep away from flammables. Use distilled/filtered water. Use only SALAV accessories.
Appliance not intended for unsupervised use by children or individuals with limited capabilities.
Identifies key components like the hanger, telescopic pole, steam hose, and steam nozzle.
Lists additional attachments such as the fabric brush, pants press, and mini ironing board.
Details model, water tank capacity, steam output time, input voltage, and output power.
Insert the Telescopic Pole into the base and tighten the Pole Connector.
Attach the Folding Hanger to the pole, extend to height, and lock in place.
Connect and tighten the Steam Hose to the Hose Connector.
Fully extend hanger arms and hang the Steam Nozzle securely.
Remove cap, fill the water tank with water, and securely replace the cap.
Plug the appliance into an electrical outlet and turn it on.
Allow 45-80 seconds for steam to heat up, depending on the selected setting.
The garment steamer is now ready for use on fabrics.
Turn off, unplug, and cool unit for 30 mins. Empty water reservoir and clean components.
Soak reservoir with vinegar solution, drain, rinse, and dry to remove mineral deposits.
Demonstrates how to use and collapse the adjustable garment hanger.
Illustrates attaching and using the Pants Press for creasing trousers.
Shows how to use the mini ironing board for steaming shirts and other garments.
Demonstrates attaching and using the fabric brush for removing lint and pet hair.
Guide on steaming shirt collars and cuffs for a crisp finish.
Techniques for steaming the main body and sleeves of shirts.
Check if plugged in; if issues persist, consult an electrician.
Check for mineral build-up or an empty water tank; refill or clean as needed.
Ensure water tank is not empty, straighten hose, or remove mineral build-up.
To Next Page
