SALICE Progressa - Page 21

74.5
16
5.5
49.5
60
14.5
29
6.7
11.8
Front locking devices - Front and side fixing
For all Progressa, Progressa
+
and Progressa
+
Shelf runners
- Engineered thermoplastics
- Compatible with all Progressa runners
- Side xing option
- Pre-drilling recommended ø 2.5 mm
- Minimum inside drawer width 130 mm
- Minimum inside cabinet width 172 mm
AFCEX56B
PACKING
2 boxes = 100 pcs right and 100 pcs left
Assembly to the bottom Assembly to the drawer
Fix with screws,
as indicated
(recommended screws
ø 4 x 16 mm)
Fix with screws,
as indicated
(recommended screws
ø 4 x 16 mm)
Use drilling template ASGD504U6XA for accurate installation of the clips, see page 67.
21