Salind OBD - Meaning LED lights; Technical data; Safety instructions

Salind OBD GPS Tracker 4G by SALIND with Online-Tracking V.1.0 EN
© Salind UG (haftungsbeschränkt)
4
1.8 Meaning LED lights
Green LED – signal status (right)
SIGNAL
MEANING
The right LED is off
Device is switched off
The right LED lights up
constantly
No signal available.
FINDER is looking for a
signal
The right LED flashes
The signal is available
Green LED – GPS status (left)
SIGNAL
MEANING
The left LED is off
FINDER is switched off
The left LED flashes
Standby mode
1.9 Technical data
Standby time
Approx.12 hours
Dimensions
67,2 mm x 49,6 mm x25 mm
GPS accuracy
Up to 3 meters
Weight
63 g
Time to start
Cold start: 35 s
Standby: 25 s
in operation: 1 s
Connection
OBD 2 Interface
Network/Band
LTE Cat M1/Cat NB1:
LTE FDD: B1/B2/B3/B4/B5/B8
/B12/B13/B18/B19/B20/B28
LTE TDD: B39 (for Cat M1 only)
EGPRS:
GSM 800 MHz (max 2W)
GSM 850 MHz (max. 2W)
GSM 900 MHz (max. 2W)
PCS 1900 MHz (max. 1W)
GPS reception
-165dBm
Built in battery
3,7V 170mAh Li-ion
Storage temperature
from -40 °C to +80 °C
Operating
environment
from -40 °C to +80 °C
Humidity.
10%-90%
1.10 Safety instructions
Signal words
The following signal words are used in this manual:
WARNING! This classifies a hazard of medium risk
level. Failure to comply with the warning may result in
serious injury.
Please note: This is a warning about possible damage
to property.