4. Clean the inside of the appliance with hot water and non-abrasive sponge.
5. Clean the heating element with a cleaning brush to remove any food residues.
Storage
1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
Guarantee and service
If you need service or information or if you have a problem, please contact your local authorized
service centre
problem Possible cause Solution
The Air fryer does not
work
The appliance is not
plugged in.
Put the mains plug in an earthed wall
socket.
You have not set the
timer.
Set the time to the required preparation
time to switch on the appliance.
The ingredients fried
with the air fryer are not
done.
The amount of
ingredients in the
drawer is too big.
Put smaller batches of ingredients in the
drawer. Smaller batches are fried more
evenly.
The set temperature is
too low.
Set the temperature to the required
temperature setting (see section ‘settings’
in chapter ‘Using the appliance’).
The preparation time
is too short.
Set the time to the required preparation
time (see section ‘Settings’ in chapter’
Using the appliance’).
The ingredients are fried
unevenly in the air fryer.
Certain types of
ingredients need to be
shaken halfway
through the
preparation time.
Ingredients that lie on top of or across
each other (e.g. fries) need to be shaken
halfway through the preparation time. See
section ‘Settings’ in chapter ‘Using the
appliance’.
Fried snacks are not
crispy when they come
out of the air fryer.
You used a type of
snacks meant to be
prepared in a
traditional deep fryer.
Use oven snacks or lightly brush some oil
onto the snacks for a crispier result.
I cannot slide the
drawer into the
appliance properly.
There are too much
ingredients in the
drawer.
Do not fill the drawer beyond the MAX
indication.
20
To Next Page
Loading...
