What to do if my Salora Radio has no sound?
If your Salora Radio isn't producing any sound, first ensure the volume isn't set to the minimum. If it is, increase the volume. Also, check if headphones are plugged into the headphone jack and if so, remove them.
How to fix a Salora Radio that won't turn on?
If your Salora Radio isn't working, check that the adapter is correctly plugged into both the mains and the DC input jack on the unit's rear. Verify the power socket is functional. If running on batteries, ensure they are installed if the power lead is unplugged. Finally, confirm the ON/OFF button on the unit's rear is switched to the 'on' position.
Why is my Salora CR624DAB Radio not working on batteries?
If your Salora Radio isn't working on batteries, first remove the adaptor lead from the back of the unit. Then, check if the batteries are correctly inserted and replace them if exhausted. Also, make sure the ON/OFF button at the rear of the unit is in the 'on' position.
What to do if my Salora CR624DAB has stuttering DAB reception?
If your Salora Radio's DAB signal is weak, try moving the radio to a different location and re-scanning for channels. Positions higher up or nearer windows may improve reception. The cause of this problem is a weak signal.
How to improve FM reception on my Salora CR624DAB Radio?
To improve noisy FM radio reception on your Salora Radio, extend the antenna or adjust the position of the radio. If the FM stereo signal is weak, switch to MONO, as it requires less signal strength.
What does 'No signal DAB' mean on my Salora CR624DAB?
If your Salora Radio displays 'No signal DAB', it usually means the signal is very weak. Try moving the radio to a different location and re-scanning.
General| Display | LCD |
|---|---|
| Frequency Range (FM) | 87.5 - 108 MHz |
| Frequency Range (DAB) | 174 - 240 MHz |
| Presets (DAB+) | 20 |
| Presets (FM) | 20 |
| Audio Output | 3.5mm headphone jack |
| Type | DAB Radio |
| Power Source | Mains or Battery |
To Next Page
