In order to switch the radio from DAB+ to FM mode, press the Power/Mode
Station information on DAB+ mode
Press the INFO button repeatedly to show the different program information.
•
Bit Rate: The data rate which the signal is being transmitted.
•
Bit Error Rate (BER): Provides details of the signal error rate.
•
Channel and Frequency: Displays the station’s transmission channel
number and frequency.
•
PTY (Program Type): Shows the type and description of the program
provided by the DAB+ station.
•
Time and Date: Displays the time and date information provided by the
broadcaster.
•
Dynamic Label Segment (DLS): Displays scrolling text information
supplied by the broadcaster.
FM operation
Auto scan
•
To search for an FM station, press the SCAN button. This will start
scanning up the frequency band.
•
To scan down the frequency band, press and hold the SCAN button.
•
Once a station has been found, the scanning will stop automatically. If no
station is found, then the tuning will stop once it has cycled through the
entire FM band (87.5 - 108 MHz).
Manual scan
•
To search FM stations manually, press the PREV/NEXT buttons repeatedly
until your desired frequency is reached.
Instructions (Cont.)
• Signal Strength:
Displays a signal bar with the strength of the current station.
button once.
To Next Page
Loading...
