Salter BPW-9101-GB User Manual

Salter BPW-9101-GB

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

BPW-9101-GB

AUTOMATIC WRIST BLOOD PRESSURE MONITOR

Instructions and Guarantee

E

Table of Contents

Questions and Answers:

E
Evan LeonardAug 1, 2025
What to do if my Salter BPW-9101-GB Blood Pressure Monitor shows an error message?
- B
  Brandon HuntAug 1, 2025
  If your Salter Blood Pressure Monitor displays an error message, several issues could be the cause: * The cuff may not be secure or may be too tight - refasten the cuff and measure again. * The cuff pressure might be excessive - relax for a moment before measuring again. * Motion was detected during measurement - relax and remeasure. * The monitor isn't detecting a pulse signal - loosen clothing on the wrist and try again. * The measurement was taken incorrectly - relax and repeat the measurement. * A calibration error occurred - retake the measurement. If it continues, contact the retailer or customer service for help.
E
Elizabeth MillerAug 17, 2025
Why my Salter Blood Pressure Monitor has no power?
- N
  Natalie MoodyAug 17, 2025
  If your Salter Blood Pressure Monitor has no power, it's likely due to one of two reasons: * The batteries are exhausted - replace them with new ones. * The batteries are inserted incorrectly - ensure they are inserted correctly.

Salter BPW-9101-GB Specifications

General

Type	Upper Arm Blood Pressure Monitor
Measurement Method	Oscillometric
Display	LCD
Memory	120 readings
User profiles	2
Cuff Size	22-42 cm
Irregular Heartbeat Detection	Yes
WHO Blood Pressure Classification Indicator	Yes
Pulse Rate Range	40-199 bpm
Power Source	4 x AA batteries
Blood Pressure Range	0-280 mmHg
Measurement Type	Systolic, Diastolic, Pulse

Summary

Introduction and Safety

General Description and Indications

Provides an overview of the monitor and its intended uses.

Contraindications and Safety Precautions

Lists crucial warnings and situations where the device should not be used.

Measurement Principle

Explains the Oscillometric Measuring method used by the device.

Device Setup and Operation

Monitor Components and Battery Installation

Identifies monitor parts and guides battery installation and replacement.

Setting Date, Time, and Measurement Units

Instructions for setting the device's date, time, and measurement units.

Measurement and Data Management

Measurement Procedure and Cuff Application

Covers cuff application, measurement steps, and viewing results.

Recalling and Deleting Measurement Records

Guides on accessing and removing stored blood pressure records.

User Guidance and Troubleshooting

Tips for Accurate Measurements and Maintenance

Offers advice for accurate measurements and device care instructions.

Troubleshooting Common Problems and Errors

Lists common issues, error codes, and their solutions.

Specifications, Compliance, and Guarantee

Technical Specifications and Ratings

Details device specifications, environmental ratings, and IP classification.

EMC Guidance and Guarantee Information

Covers EMC guidelines, immunity standards, and product guarantee terms.

Related product manuals

Preview: Salter BPA-9200

Salter BPA-9200

Preview: Salter BPA-9201-EU

Salter BPA-9201-EU