Salto Aelement - Hardware Mounting and Initial Setup; Battery Installation and Cable Connections; Pre-Programming Door Closure Warning; Tool Requirements

Installation guide AELEMENT ANSI LOCK220511-ED. 27/09/2012
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2011 SALTO Systems S.L.
OUTSIDE
INSIDE
INSIDE
Only LR03
Batteries
b
a
READER CABLE
LOCK CABLE
3/4
Screw driver
PZ2
Screw driver
Torx T10 TAMPER
7
8
9
10
11
12
13
14
1
Aligned
OUTSIDE & INSIDE
2
WIRELESS CABLE
(OPTIONAL)
Alinear
EXTERIOR - INTERIOR
CABLE LECTOR
CABLE CERRADURA
=
=
Installation guide AELEMENT
ANSI Lock
Fasten with screw to keep it aligned
Fijar el tornillo para mantener el alineamiento
Fixer la vis pour assurer l'alignement .
EXTERIOR
EXTERIEUR
INTERIOR
INTERIEUR
INTERIOR
INTERIEUR
AT THIS POINT DO NOT
CLOSE THE DOOR
PROGRAM THE LOCK FIRST
follow user manual
Eng
NO CIERRE LA PUERTA.
PROGRAMAR ANTES LA
CERRADURA
TÜRE NICHT SCHLIESSEN.
ZUERST SCHLOSS
PROGRAMMIEREN
NE PAS FERMEZ LA PORTE
DE PROGRAMMER LA
SERRURE
E
D
F
I
PRIMA DI CHIUDERE LA PORTA,
PROGRAMMARE LA
SERRATURA
REMOVE
QUITAR
RETIRER