EasyManua.ls Logo

Salto XS4 One - User Manual

Salto XS4 One
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
225583 - ED.2 - 04/09/2023
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
1/4
E i 7
50
xx..
P
series
E i 7
51
xx..P
E i 7
53
xx..P
I
Eng
F
D
E
Installation guide
Guía de instalación
Montageanleitung
Guide d'installation
Guida all'installazione
Guia de instalação
P
SALTO recommends the use of a mortise lock, with a maximum 4º pre-turn.
SALTO recomienda utilizar cerraduras con un pregiro máximo de 4º.
SALTO empfiehlt den Einsatz von Einsteckschlössern mit max. 4° Vorspannung.
SALTO recommande d’utiliser des serrures à mortaiser avec un angle au repos de 4° maximum.
SALTO raccomanda l'utilizzo di una serratura con un angolo di pre-rotazione massimo di 4°.
SALTO recomenda utilizar fechaduras com uma pré rotação máxima de 4º.
Mortise Lock not included
Cerradura de embutir no
incluida
Einsteckschloss nicht
enthalten
Serrure à mortaiser non
incluse
Serratura non inclusa
Fechadura de embutir
não incluida
4
°
ma
x
.
42mm 42mm
160mm 125mm
23,5mm 19,5mm
4
5
°
O
u
t
s
i
d
e
E
x
te
r
i
o
r
Au
ß
e
n
s
e
i
t
e
E
x
r
i
e
u
r
E
s
te
r
n
o
I
n
s
i
d
e
I
n
te
r
i
o
r
I
n
n
e
n
s
e
i
t
e
I
n
r
i
e
u
r
I
n
t
e
r
n
o
t
OUTSIDE
I
Eng
F
D
E
P
INSIDE
O
2
5
m
m
O
14mm
O
14mm
145mm 105mm
TORX 20 (x6)
TORX 20 (x6)
ALLEN 3 (x2)
TORX 20 (x1)
21,5mm
O
14mm
Installation guide
XS4 One High Security
t > 60
BOLT (Depending on door thickness)
*
*
*
*
* For door thickness > 60mm 6 screws are supplied, but only 3 must be installed. Make sure to select the correct length (see page 3).
* Para grosor de puerta > 60mm se suministran 6 tornillos, pero solo se han de instalar 3. Asegúrese de seleccionar la longitud correcta (ver pág. 3).
* Für Türstärken >60 mm werden 6 Schrauben geliefert, wovon aber nur 3 benötigt werden. Bitte stellen Sie sicher, dass Sie die korrekte Länge
verwenden (siehe S. 3).
*
Pour une épaisseur de porte > 60mm, 6 vis sont fournies, mais seulement 3 doivent être installées. Veuillez vous assurer de sélectionner la bonne
longueur (voir page 3).
* Per porte con spessore >60mm, vengono forniti 6 viti, ma solo 3 devono essere installate. Assicurati di scegliere la lunghezza corretta ( vedi pagina 3).
*
Para portas com espessura > 60mm o fornecidos 6 parafusos, mas apenas 3 devem ser instalados. Certifique-se de selecionar o comprimento
correto (ver página 3).
I
Eng
F
D
E
P
*
(1)
(1) PAS24 Standard complies only with 44mm
and 54mm certified doors.
Question and Answer IconNeed help?

Do you have a question about the Salto XS4 One and is the answer not in the manual?

Summary

Preparation and Notes

Mortise Lock Information

Indicates that the mortise lock is not included with the product.

Screw Length for Thick Doors

Guidance on selecting correct screw length for doors over 60mm.

Mortise Lock Pre-turn Angle

Recommendation for mortise lock pre-turn angle not exceeding 4 degrees.

Installation Steps Overview

Select Handing

Instructions for selecting the correct handing (left/right) for the lock.

Fixing Direction

Instruction on how to fix components by turning clockwise.

Specific Lock Compatibility

Note for LE7Sxx series mortise locks and unplugging procedure.

Spindle Adjustment by Door Thickness

Guidance on adjusting the installed spindle based on door thickness.

Salto XS4 One Specifications

General IconGeneral
Power SupplyBattery
Battery LifeUp to 3 years
Access ControlRFID
Finish OptionsSatin Stainless Steel
Door TypeWood, Metal
RFID TechnologiesMIFARE, DESFire
CommunicationWireless
IP RatingIP55
Operating Temperature-20°C to +60°C
Door Thickness30mm to 120mm
StandardsEN 12209, EN 1634-1
MaterialStainless Steel
Weight1.5 kg
CertificationsCE
Lock TypeElectronic

Related product manuals