Salton HP1502 - Grounded Plug

16. Do not clean the appliance with metal scouring pads. Pieces can
break off the pad and touch electrical parts, creating a risk of electric
shock.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not  t fully into the electrical outlet
contact a quali ed electrician. Do not modify the plug in any way or use
an adaptor.
HOW TO USE
Any  at-bottomed pot or container that can be used on a conventional
electric stove element can also be used on the Infrared Cooktop.
1. Place the Cooktop on a smooth, dry,  at surface. For proper
ventilation provide at least 4 – 6 inches (10 - 15 cm) of space above
and around the appliance.
2. Be sure that the ON/OFF Knob on the back left side of the unit is
turned to the OFF position and the Temperature Adjustment Knob on
the front of the unit is on ‘0’.
3. Plug into a 120 Volt A.C. wall outlet.
4. Place  lled cookware on the burner. NOTE: DO NOT operate the
burner without  lled cookware on the burner. Always use a pot or
pan that is similar in size to the burner. Center the pot or pan on the
burner.
5. Turn the ON/OFF Knob to the ON position by turning clockwise.
6. Turn the Temperature Control Knob clockwise to desired setting.
NOTE: #5 is the highest setting. The Indicator Light will glow
and go ‘on’ and ‘off’ as the selected temperature is automatically
maintained.
7. When  nished cooking, always turn the appliance off by turning the
ON/OFF knob counter clockwise to the OFF position and turn the
Temperature Control Knob to the ‘0’ position. Unplug the unit from
the wall outlet.
3
HP1502_Booklet.indd 3HP1502_Booklet.indd 3 5/5/15 4:25 PM5/5/15 4:25 PM