Operator’s manual
Front disc mowers
KDF
- 2 -
1. IDENTIFYING THE MACHINE
Data plate is mounted to the mower’s main frame in the place shown below (Fig. 1).
Fig. 1. Data plate place Fig. 2. Data plate
Data plate includes:
- name of the manufacturer, - weight,
- mower’s number, - quality management sign,
- mower’s type, - bar code,
- version number, - CE marking, means that mower is conforming with
Directive 2006/42/EC and harmonized standards,
- MADE IN POLAND sign.
CAUTION:
In case the operator's manual is unclear or illegible all necessary information
can be obtained from manufacturer or the dealer.
2. INTRODUCTION
This operator’s manual should be considered as the basic mower’s equipment. If the mower is
handed over to another operator, it should be in working condition and given away along with
operator’s manual and it’s other basic equipment.
Operator’s manual is attached to every machine in order that the operator can familiarize
himself with design, working principles, service and adjustment of the mower. The user of
the mower should be familiar with common safety rules and procedures.
The mower is manufactured according to international safety rules.
Compliance with the warnings in this operator’s manual will ensure safe operation.
Please contact your dealer if you have any queries relating to the operation and service of
the mower.
Operator’s manual remains part of mower’s equipment.
GENERAL WARNING
When operating the mower please comply with the warnings and safety
regulations shown throughout this manual by this safety alert symbol.
CAUTION:
Operation of the mower before reading the operator’s manual carefully as
well as operating by the unauthorized staff, especially by children, is strictly
forbidden.
To Next Page
Loading...
Need help?
General
