EasyManuals Logo

SaMASZ SAMBA 160 User Manual

SaMASZ SAMBA 160
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
SAMBA
REAR DISC MOWER
WARNING!
Use of the mower for purposes other than mentioned herein is forbidden.
Different use than the above mentioned shall be considered as improper and
may lead to revoking of the warranty. The mower should be operated,
maintained and repaired only by personnel who are familiarized with its detailed
specifications and safety rules and procedures. Willful modifications to the
mower may lead to revoking the warranty.
Tab. 1. Mowing heights depending on cutter bar and its inclination angle
„Lite Cut” Cutter bar
No tilt
2° tilt
Standard mowing height
Cutting height setting increased for about 20 mm
Cutting height setting increased for about 25 mm
Cutting height setting increased for about 30 mm
NOTE: Grass, which has not grown much should be mowed with zero angle inclination.
NOTICE:
SAMBA mowers are not fully resistant to stones and therefore when operating on a stony field,
it is highly likely, that discs might be replaced frequently or in extreme case, cutter bar might be
seriously damaged, which is NOT COVERED by free warranty servicing

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SaMASZ SAMBA 160 and is the answer not in the manual?

SaMASZ SAMBA 160 Specifications

General IconGeneral
BrandSaMASZ
ModelSAMBA 160
CategoryFarm Equipment
LanguageEnglish

Related product manuals