English
17
After use
• Press the on/o switch to stop the vacuum cleaner.
• Unplug the cord.
• Empty the dust reservoir.
SETTING UP, CHANGING, AND CLEANING THE FILTER
IMPORTANT
WARNING: Allows unplug the device before opening the collection
container.
NOTE: Always use the vacuum cleaner with the lter in place.
PRECAUTION: The suction aperture should be open, and free of
obstructions at all times. If not, the motor will overheat, possibly resulting
in damage to the device.
1. To open the dust reservoir, press the button and remove the dirt-collection
container.
2. Remove the lter and clean it. To do so, rinse the lter in cold water and wait
until it has completely dried before putting it back in place.
Press the release
button of dust
tank
Take o the
dust tank
To Next Page
Loading...
