GENERAL OPERATIONS
Install / Removing Belt Clip
Safety Precautions
1. Do not Disassemble.
2. Do not dispose the batteries in the fire.
3. Do not dispose the batteries as household wastes, and it must be collected and treated properly.
4. Do not charge or charge battery in hazardous location.
5. Do not short-circuit the terminals.
● Slide the Belt clip into the slot
A “click” sound indicates the Belt Clip is locked into position.
● Push the latch of belt clip in
● While pushing the belt clip latch, push up the belt clip at the
Battery on First Use
Since batteries leave factory without a fully charging, please charge the new batteries before using. Under normal circumstances,
the battery on first use needs 5 hours of charging. The first three times of fully charging and discharging provides batteries the best
capacity.
When you find out the battery is low, it is required to charge or replace it.
To Next Page
Loading...