To Next PageTo Next PageWhat to do if SAMES KREMLIN AIRMIX 20C50 GT Water Pump doesn't stop when the spray gun is shut off?
If your SAMES KREMLIN Water Pump continues to run after you shut off the spray gun, it may be a problem with the exhaust valve, valve seal, suction valve or upper cartridge. Check these components to resolve the issue.
Why is there priming trouble with my SAMES KREMLIN AIRMIX 20C50 GT Water Pump?
If you're having priming trouble with your SAMES KREMLIN Water Pump, and either air is constantly coming out of the spray gun or no air/material is coming out, ensure the spray gun is fully opened to evacuate air. Also, check for air intake at the fitting or suction rod and inspect the pump valves. If a valve is stuck due to dry paint, try unsticking it by blowing air pressure directly through the suction fitting.
What to do if my SAMES KREMLIN Water Pump does not reverse?
If your SAMES KREMLIN Water Pump isn't reversing, check the spring of the air motor reversing block. Lubricate the reversing block with HP 150 oil. Also, verify the presence of pilot air, depending on your air motor model.
Why is the lubricant in my Intensive™ SAMES KREMLIN AIRMIX 20C50 GT Water Pump cup quickly colored?
If the lubricant in the cup of your Intensive™ SAMES KREMLIN Water Pump is quickly becoming colored, inspect the upper packing. Try tightening the cup, and if necessary, change the seals.
General safety instructions and precautions for using the equipment safely.
Visual representation of safety warnings and hazards associated with the equipment.
Covers pressure, injection, fire/explosion, and toxic product hazards with precautions.
Recommendations regarding equipment parts, protectors, and modifications.
Guidelines for storing the equipment before installation, including temperature and protection.
Guidelines for storing the equipment after installation, including temperature and protection.
Instructions for disassembling and reinstalling the suction valve component.
Instructions for disassembling and reinstalling the exhaust valve component.
Instructions for disassembling and reinstalling the lower mobile packing.
Instructions for disassembling and reinstalling the upper packing component.
Instructions for disassembling and reassembling the reversing block.
List of optional parts available for the AIRMIX® pumps, categorized by request.
List of accessories available for the AIRMIX® pumps.
Procedures for cleaning, flushing, and maintaining the pump to ensure operational life.
Instructions for servicing the spray gun according to standard procedures.
Guidance on servicing the filter if it's mounted at the fluid outlet.
Details the components and how the AIRMIX® pump functions mechanically.
Step-by-step guide for initiating the operation of the AIRMIX® pump.
Steps for safely shutting down the pump for brief periods.
Steps for safely shutting down the pump for extended periods.
Overview of the stainless steel pump, its low maintenance, and recommended applications.
Technical specifications for the AIRMIX® 10C50 GT pump model.
Technical specifications for the AIRMIX® 20C50 GT pump model.
Details on fittings for pump assembly and hoses, including dimensions.
Explanation of the ATEX regulation markings on the pump label.
Specifies the temperature class rating for the pump models.
Visual representation of the pump and spray gun installation setup in a spray booth.
General| Brand | SAMES KREMLIN |
|---|---|
| Model | AIRMIX 20C50 GT |
| Category | Water Pump |
| Language | English |
