samet smart slide - User Manual

25306630 / 00 - 20.07.2012
Rayların Vida Konum Ölçüleri
Screw Location for the Slides
37
32 96 96
9
350 400
450 500
550 600
Çekmece Ölçüleri
Drawer Dimensions
max.18
ÇD= NB - 10mm
DD= NL - 10mm
ÇİG= KİG - 45mm
DIW= CIW - 45mm
Ø2
32
36
8
11
7
Ø6
10
Ø2
Ø6
Rayı, koyu renk ile işaretlenmiş deliklerden vidalayınız.
Screw the slide from marked holes.
KİG
CIW
KİD
CID
NB = (Ray Boyu)
NL = (Slide Length)
min. 41 mm
Tavsiye Edilen Vida ve Şablonlar
Recommended Screw and Templates
Kabin İç Genişliği
Kabin İç Derinliği
Çekmece Derinliği
Nominal Boy (Ray boyu)
: KİG
: KİD
: ÇD
: NB
Cabinet Internal Width
Cabinet Internal Depth
Drawer Depth
Nominal Length
: CIW
: CID
: DD
Çekmece İç Genişliği : ÇİG Drawer Internal Width : DIW
: NL
Ø3,5 x 16mm
Smart Slide Mandal ve
Tırnak Deliği Delme Şablonu
Smart Lock Template
Smart El Tipi Ray
Montaj Şablonu
Smart Drilling Jig
Smart Cetvelli Ray
Montaj Şablonu
Smart Drilling Jig with Ruler
Ø6,1 x 11,5
Yavaşlacılı Bas-Aç Çekmece Sistemleri Kullanım Kılavuzu
Push-Open So Close Drawer Systems Manual

Summary

Cabinet and Drawer Dimensions

Cabinet Dimension Definitions

Defines key cabinet dimensions (width, depth) and slide nominal length for system installation.

Drawer Dimension Calculation

Provides formulas to calculate drawer depth and width based on cabinet and slide measurements.

Installation Tools and Templates

Recommended Screws and Templates

Illustrates recommended screws and drilling templates for slide and lock installation.

Slide Screw Location Guide

Shows specific hole positions for securely screwing the slides onto the cabinet.

Smart Slide Operation and Adjustment

Smart Lock Installation Note

Note on using angled holes for smart lock mounting when floor width is less than 12 mm.

Drawer Positioning Adjustment

Instructions on how to adjust drawer positioning (up/down, left/right) using the adjustment knob.

Drawer Removal Mechanism

Explains how to easily remove the drawer by pushing the latch smart lock.

Drilling Jig Models

Smart El Tipi Ray Montaj Şablonu

Details for the Smart El Tipi Ray (Smart Drilling Jig) with model codes.

Smart Cetvelli Ray Montaj Şablonu

Details for the Smart Cetvelli Ray (Smart Drilling Jig with Ruler) with model codes.

samet smart slide Specifications

General

Category	Door Opening System
Brand	SAMET
Model	Smart Slide
Maximum Load	100 kg
Operating Temperature	-20°C to +50°C
Noise Level	< 60 dB
Control Type	Remote control, push button
Safety Features	Obstacle detection